Permolit Permomax Ceiling Paint Extra whiteness, high coverage and breathable full matt ceiling surfaces. Permolit Permomax Ceiling Paint is a water-based, acrylic emulsion-based interior ceiling topcoat developed to provide high whiteness, strong coverage and a decorative full matt finish on interior ceilings.

 

✓ High Coverage	✓ Extra Whiteness
✓ Breathable Surfaces	✓ Low-Splatter Application
✓ Full Matt Finish	✓ Resistant to Mould and Fungal Growth
✓ Low VOC	✓ Does Not Release Odour
✓ Contains No Free Formaldehyde	✓ Water-Based

 

About Permolit Permomax Ceiling Paint

Permolit Permomax Ceiling Paint is a water-based, acrylic emulsion-based,
decorative, full matt ceiling topcoat with a paint film that is
resistant to mould and fungal growth.
It can be applied to properly prepared interior building surfaces suitable for painting.

Its high covering power and extra whiteness help create a clean, uniform and bright
appearance on ceilings. Its breathable structure supports vapour permeability,
while the extra matt finish helps make minor surface imperfections less noticeable.

Its easy application and low-splatter properties provide more controlled application
across large ceiling surfaces. The formulation is water-based, low in VOC,
does not release odour and contains no free formaldehyde.

---

Extra White, Full Matt Ceilings Permolit Permomax Ceiling Paint combines high whiteness with strong covering power to help create clean and uniform interior ceiling surfaces. Its full matt finish reduces visible light reflection and helps make minor plaster or surface imperfections less noticeable. These properties help create bright, clean and decorative ceilings in interior living spaces.

 

Breathable Ceiling Surfaces Permomax Ceiling Paint supports vapour permeability through its breathable structure, helping ceiling surfaces breathe. This makes it suitable for properly prepared ceiling surfaces in interior areas, including spaces where moisture may occur such as kitchens and bathrooms.

 

Paint Film Resistant to Mould and Fungal Growth Permolit Permomax Ceiling Paint has a paint film that is resistant to mould and fungal growth. The active ingredient in the product helps protect the paint film against mould and fungal growth, thereby supporting the service life of the coating. It can be used on properly prepared surfaces in bathrooms, kitchens, food production facilities, kindergartens and living spaces where mould and fungal growth is undesirable. If mould or fungal growth is already present, mechanical cleaning must be carried out before painting, followed by suitable pre-treatment using Permobio.

 

Key Benefits

● High CoverageClass 2 hiding power provides strong covering performance for interior ceiling applications.	● Extra WhitenessIts high whiteness helps create clean, bright and fresh-looking interior ceilings.
● Breathable SurfacesIts breathable structure supports vapour permeability and helps ceiling surfaces breathe.	● Low-Splatter ApplicationIts low-splatter formulation helps provide cleaner and more controlled application.
● Full Matt Decorative FinishCreates a clean and decorative full matt appearance on interior ceilings.	● Helps Conceal Surface ImperfectionsIts extra matt finish helps make minor substrate imperfections less noticeable.
● Easy ApplicationCan be applied using a medium pile roller, brush or airless spraying system.	● Low VOCContains a maximum of 26 g/L VOC, below the EU limit value of 30 g/L for this product category.
● Does Not Release OdourOne of the performance properties stated on the product packaging is that it does not release odour.	● Contains No Free FormaldehydeAccording to the product packaging, the formulation contains no free formaldehyde.

 

Areas of Use

Permolit Permomax Ceiling Paint can be applied to properly prepared
interior building surfaces and ceilings suitable for painting.

✓ Living Room Ceilings	✓ Lounges	✓ Bedrooms
✓ Corridors	✓ Kitchens	✓ Bathrooms
✓ Kindergartens	✓ Living Spaces	✓ Suitable Interior Surfaces
✓ Suitable interior surfaces in food production facilities

 

Application Information

Application Information	Value / Description
Thinning	Approximately 20% by volume with water
Application Tools	Medium pile roller, brush or airless spraying system
Number of Coats	At least 2 coats
Waiting Time Between Coats	4 – 6 hours
Touch Dry	Approximately 30 minutes
Through Dry	Approximately 24 hours
Coverage	Approximately 6 – 7 m²/kg (11 – 15 m²/L) in a single coat
Application Temperature	Surface temperature should be between +5°C and +35°C

Coverage may vary depending on surface smoothness and absorbency.
Do not apply in strong air movement or on excessively damp, wet or hot surfaces.

---

Surface Preparation

1. Clean the surface.
   Remove dirt, dust, oil, old paint residues and loose material that cannot support itself.
2. Make sure the surface is dry.
   Paint should be applied to dry and properly prepared surfaces.
3. Repair cracks and surface imperfections.
   Uneven areas, defects and cracks should be repaired using
   Permolit Permomacun Water-Based Super Acrylic Interior Wall Putty.
4. Prime new plastered and putty-applied surfaces.
   New surfaces being painted for the first time should be primed with one coat of
   Permobinder or Permoten Satin Gypsum Primer.
5. Prepare previously painted surfaces.
   Previously painted surfaces and other suitable substrates should be primed with
   one coat of Permomax Universal Primer.
6. Allow the primer to dry.
   Paint application can begin approximately 6 hours after primer application.
7. Prepare surfaces with existing mould or fungal growth.
   Carry out mechanical cleaning first and then apply suitable pre-treatment using
   Permobio.

 

1. Stir Thoroughly Stir the paint thoroughly before application until a homogeneous consistency is achieved.

2. Thin with Approximately 20% Water Thin the product with approximately 20% water by volume.

3. Apply the First Coat Apply evenly using a medium pile roller, brush or airless spraying system.

4. Wait 4 – 6 Hours Allow the recommended waiting time before applying the next coat.

5. Apply the Second Coat Complete the application using at least two coats.

 

Technical Specifications

Property	Technical Information
Product Type	Decorative interior ceiling topcoat
Resin Type	Acrylic emulsion-based
Finish / Gloss Level	Full matt
Water-Based	Yes
Wet Scrub Resistance	Class 4
Hiding Power	Class 2 – 7.5 m²/L
Coverage	Approximately 6 – 7 m²/kg (11 – 15 m²/L) in a single coat
Thinning Ratio	Approximately 20% by volume with water
Number of Coats	At least 2 coats
Waiting Time Between Coats	4 – 6 hours
Touch Dry	Approximately 30 minutes
Through Dry	Approximately 24 hours
Application Tools	Medium pile roller, brush or airless spraying system
Packaging	20 kg (12 L), 10 kg (6 L), 3.5 kg (2.1 L)
VOC	Contains a maximum of 26 g/L VOC. The EU limit value for this product category is 30 g/L.
Application Temperature	Surface temperature between +5°C and +35°C

 

Packaging Options 20 kg (12 L) | 10 kg (6 L) | 3.5 kg (2.1 L) Permolit Permomax Ceiling Paint is available in three packaging sizes to suit different interior ceiling painting requirements.

 

Storage and Precautions

• Store in unopened packaging on a pallet in a cool and dry place.
• Protect from direct sunlight.
• Protect from freezing.
• Keep out of reach of children.
• Do not get in eyes, on skin or on clothing.
• Do not eat, drink or smoke while using this product.
• Apply when the surface temperature is between +5°C and +35°C.
• Do not apply in strong air movement or on excessively damp, wet or hot surfaces.
• Clean application tools with water after use.

According to the technical documentation, the product can be stored for up to
3 years in unopened packaging when the specified storage conditions are followed.
Always follow the application, surface preparation, storage and safety instructions.

---

Extra White, Full Matt Ceilings with Permolit Permomax

Permolit Permomax Ceiling Paint combines high coverage, extra whiteness,
a full matt finish and breathable surface properties in a water-based decorative ceiling paint.
Its low-splatter and easy-application formulation helps provide a clean and uniform finish
across interior ceiling surfaces.

Available in 20 kg, 10 kg and 3.5 kg packaging,
Permomax Ceiling Paint is designed for users looking for
high coverage ceiling paint, extra white ceiling paint, full matt ceiling paint
or breathable interior ceiling paint.