Permojel Transparent Gel Primer
A great paint finish starts with proper surface preparation.
Permolit Permojel is a transparent, ready-to-use, water-based acrylic gel primer specifically developed for highly absorbent and powdery surfaces. Its penetrating formula helps bind loose particles to the substrate, providing a sound and more uniform foundation for subsequent paint applications.
Water-Based
Ready to Use
What Is Permolit Permojel?
Permolit Permojel Transparent Gel Primer is a specially developed surface preparation product designed for gypsum and other highly absorbent substrates. Its water-based acrylic emulsion formula penetrates deeply into powdery and absorbent surfaces, helping to bind loose surface particles.
By forming an effective connection between the topcoat and a sound substrate, Permojel helps create more uniform conditions for painting. It regulates the drying behaviour of the finishing coat and helps prevent unevenness or streaking that can result from differences in surface absorbency.
With its ready-to-use gel formula, easy application and non-splashing, non-dripping properties, Permojel offers a practical solution for professional surface preparation.
Key Features and Benefits
Designed to support consistent, efficient paint application.
Substrate Consolidation
Penetrates absorbent and powdery surfaces, helping bind loose particles and strengthen the substrate.
Reduced Paint Consumption
Prepares highly absorbent surfaces and helps reduce the amount of finishing paint required.
More Uniform Finish
Regulates topcoat drying and helps prevent unevenness and streaking in the finished surface.
Easy Application
Ready to use without thinning. Applies evenly by brush or roller without splashing or dripping.
Suitable Surfaces
Permojel is particularly suitable for highly absorbent and powdery substrates, including:
How to Apply Permojel
Proper surface preparation is essential for achieving the intended performance of the primer.
01. Prepare the Surface
Remove dirt, dust, grease, old paint residues and any loose material that is not firmly attached to the substrate.
02. Sand and Remove Dust
After sanding gypsum and similar surfaces, remove remaining dust using a soft brush in a single downward direction. Ensure the surface is dry before priming.
03. Prepare the Primer
Permojel is supplied ready to use. Stir before application. No water or additional thinner is required.
04. Apply One Coat
Apply a single coat using a brush or roller. Avoid excessive rolling, repeated brushing and overlapping at cutting-in areas. Do not allow a glossy or glass-like film to form on the surface.
05. Allow to Dry
The primer becomes touch dry in approximately 30 minutes. Allow at least 4 hours before applying the finishing coat. Lower temperatures and high relative humidity may extend drying times.
Technical Specifications
| Product Name | Permolit Permojel Transparent Gel Primer |
|---|---|
| Product No. | 03.027 |
| Base | Water-based acrylic emulsion |
| Appearance | Transparent gel primer |
| Thinning | Ready to use |
| Coverage | 14–20 m²/L (depending on surface conditions) |
| Application | Brush or roller, one coat |
| Touch Dry | Approximately 30 minutes |
| Topcoat Application | After at least 4 hours |
| Surface Temperature | +5°C to +35°C |
| Packaging | 2.5 L / 7.5 L / 15 L |
| Shelf Life | 3 years in unopened packaging under suitable storage conditions |
Note: Coverage and drying times may vary depending on substrate characteristics and environmental conditions.
Available Packaging
Important Application Notes
- Apply only when surface temperature is between +5°C and +35°C.
- Do not apply to excessively humid or hot surfaces.
- Avoid application in very windy conditions.
- Do not create a glossy or glass-like film on the surface.
- Avoid excessive rolling, repeated brushing and overlaps.
- Allow additional drying time in low temperatures or high humidity.
Storage and Shelf Life
Store Permojel in its original, unopened packaging, on pallets, in a cool and dry location. Protect from direct sunlight and freezing. Under these conditions, the product can be stored for up to 3 years.
Maximum stacking limits: 5 containers for 15 L packaging, 6 containers for 7.5 L packaging and 7 containers for 2.5 L packaging.
Frequently Asked Questions
Does Permojel need to be diluted?
No. Permojel is supplied ready to use and does not require thinning before application.
How long should I wait before applying the topcoat?
Wait at least 4 hours before applying the finishing coat. Additional drying time may be needed in cold or humid conditions.
Which surfaces are suitable for Permojel?
It is designed for gypsum, fine plaster, plasterboard, aerated concrete, low-quality plaster and other highly absorbent or powdery substrates.
Can Permojel reduce paint consumption?
Yes. By preparing and regulating highly absorbent substrates, it helps reduce topcoat paint consumption.
Health and Safety
Keep out of reach of children. Avoid contact with eyes, skin and clothing. Do not eat, drink or smoke while using this product. In case of skin contact, wash thoroughly with water. In case of eye contact, rinse cautiously with water for several minutes.
Contains a mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1), CAS No. 55965-84-9. May produce an allergic reaction. Dispose of contents and containers in accordance with applicable local regulations.
Better Surface Preparation. Better Paint Results.
Prepare absorbent surfaces with Permolit Permojel Transparent Gel Primer for more consistent application, reduced paint consumption and a uniform finishing appearance.



Reviews
There are no reviews yet.