Duvart Mermer Decorative Wall Paint
Gloss water-based marble effect interior paint. Can be applied to any levelled primed surfaces. Can be used for exterior work for painting smooth, polished surfaces that are not exposed to strong moisture. To begin with, the surface must be cleaned of dirt, dust, moisture and paint residues and smoothed. In order to give the painted surface a more aesthetic appearance and reduce the amount of consumable materials, we recommend using Permolit putty. Before the first painting of the surface covered with semi-matt plaster or putty it is recommended to be primed. For this purpose, you can use Permolit Binder primer diluted in a ratio of 1:7 or Permolit Alçı Astarı gypsum plaster primer. The surface should be soaked with Permolit silicone interior paint. The smoothed previously painted surface is covered with the Permolit Permolak acrylic primer or Permolit silicone-based exterior primer, after which it is painted with Permolit silicone interior paint. At the first and second painting, a small amount of paint is taken to the spatula, and then it is applied by light sliding movements in an arbitrary order to the surface. When the third and final layer is applied, the surface is ground with sandpaper with grain size less than 250 microns and dust is removed. A small amount of paint is again taken the spatula and applied to the surface in the form of a crescent or any other shape, after which the surface is polished. If desired, at least two days later the surface can be covered with a non-staining varnish.